Skip to content
Switch article
USB Creation Progress Is Stuck for a GPU MinerIP Reporter Cannot Find the Miner IPASIC Miner SD Card Flash FailedVirus Removal or Upgrade FailedOKCARE Shows a Connection Error During ScanOKCARE Shows an Incorrect Password During ScanOKCARE Shows a Network Error During Scan

USB Creation Progress Is Stuck for a GPU Miner

Feature path: Open OKCARE, select the GPU module, and click Create USB.

Follow the instructions for the stage where progress stops:

  1. First progress bar: Downloading the system image. If the download does not move for a long time, check the computer's network connection and make sure the drive where OKCARE is installed has enough free space, then start the process again.
  2. Second progress bar: Writing the system image to the USB drive. If writing does not move for a long time, format the USB drive and try again. If there is still no progress, use another USB drive or USB port.
  3. Third progress bar: Binding the user ID. If OKCARE reports that user ID binding failed, use the Switch GID function to bind it again. You can also connect a keyboard to the miner and enter changeGid your-GID. The command is case-sensitive, and there must be one space between changeGid and the numeric GID.

Do not remove the USB drive, close OKCARE, or turn off the computer while the USB drive is being created. For more information, see GPU Module Tutorial.

If the issue persists after these checks, contact us and provide when the issue occurred, the device or App version, the complete error message, and relevant logs. Do not send passwords, private keys, or complete verification codes.