Skip to content
Switch article
USB Creation Progress Is Stuck for a GPU MinerIP Reporter Cannot Find the Miner IPASIC Miner SD Card Flash FailedVirus Removal or Upgrade FailedOKCARE Shows a Connection Error During ScanOKCARE Shows an Incorrect Password During ScanOKCARE Shows a Network Error During Scan

OKCARE Shows an Incorrect Password During Scan

Feature path: Open OKCARE, select the ASIC module, and click Set Access Password. After entering the password, set the IP Range, then click Load or Scan.

An incorrect-password message means that OKCARE can connect to the miner, but the access password did not pass authentication.

  1. Open the miner dashboard in a browser and confirm that the current username and password can sign in.
  2. Return to OKCARE, set Access Password to the password currently used by the miner dashboard, then load or scan again.
  3. If miners in the same batch use different passwords, load them in separate groups by password instead of scanning all of them with one access password.
  4. If the password is forgotten, reset the miner according to the instructions for that model. A reset may restore network, pool, or other settings, so record the current configuration first. After the reset, sign in with the default credentials specified for that model and change the password promptly.

Do not share the miner dashboard password with anyone.

If the issue persists after these checks, contact us and provide when the issue occurred, the device or App version, the complete error message, and relevant logs. Do not send passwords, private keys, or complete verification codes.