Skip to content
Switch article
USB Creation Progress Is Stuck for a GPU MinerIP Reporter Cannot Find the Miner IPASIC Miner SD Card Flash FailedVirus Removal or Upgrade FailedOKCARE Shows a Connection Error During ScanOKCARE Shows an Incorrect Password During ScanOKCARE Shows a Network Error During Scan

IP Reporter Cannot Find the Miner IP

Feature path: Open OKCARE and click IP Reporter, then trigger IP reporting on the miner.

If IP Reporter cannot find the miner IP, check the following in order:

  1. Confirm that the miner has started: Wait for the control board to finish starting before pressing the IP Reporter button. If the control board does not respond, turn off the miner and restart it.
  2. Check the network connection: Make sure the network cable is firmly connected and the miner's Ethernet port lights are working. Try another cable or switch port.
  3. Confirm that both devices are on the same LAN: The computer running OKCARE and the miner must be connected to the same local network, or OKCARE may not receive the reported IP.
  4. Check for a hardware problem: If IP Reporter still cannot find the IP after a restart and network check, the control board, Ethernet port, or IP Reporter button may require inspection.

If the issue persists after these checks, contact us and provide when the issue occurred, the device or App version, the complete error message, and relevant logs. Do not send passwords, private keys, or complete verification codes.