Skip to content
Switch article
BTC Mining GuideLTC Mining GuideBCH Mining GuideETC Mining GuideRVN Mining GuideGPU OS User Guide

BTC Mining Guide

BTC uses the SHA256 algorithm. This guide explains how to create a BTC sub-account, configure a miner, and check hashrate and earnings.

Quick Reference

Item Current Details
Algorithm SHA256
Hardware ASIC miners that support SHA256
Mining method Sub-account mining
Payout scheme FPPS
Standard payout threshold 0.005 BTC
Pool fee 2%
Merged-mining bonus coins NMC, FB

For each bonus coin’s payout scheme, pool fee, and payout threshold, see Pool fees and payout thresholds.

1. Create a BTC Sub-account

  1. Open and sign in to the OKMINER App, tap Pools in the bottom navigation, then tap Add in the upper-right corner.
  2. Select BTC and enter a sub-account name.
  3. Select dedicated or joint mining and configure the payout settings shown on the page.
  4. Save, return to the pool list, and confirm that the BTC sub-account appears.

A sub-account name must start with a letter, contain only letters and numbers, be 3–12 characters long, and is case-sensitive. For full details, see Sub-account Mining.

2. Select a Pool Address

BTC and BCH share the same SHA256 endpoints; the sub-account determines the coin. When configuring BTC, the worker name must contain a BTC sub-account. To change coins, see Quickly Switch Between BTC and BCH.

TCPstratum+tcp://sha256.okminer-pool.com:2288Alternate port: 333
SSLstratum+ssl://ssha256.okminer-pool.com:2500Alternate port: 334

Open and sign in to the OKMINER App, tap Pools in the bottom navigation → select the BTC sub-account → Pool Address Speed Test. Choose a reachable route with lower latency. TCP addresses work with almost all miners and are recommended as the first choice; before using an SSL address, confirm that the miner firmware supports SSL. For route-selection details, see Pool Addresses.

Tip

If direct pool connections are unstable for users in mainland China, use the OKPROXY encrypted proxy for a secure and stable connection.

3. Configure the Miner

Find the Miner IP

Connect the computer and miner to the same LAN, then use one of these methods:

  • Open OKCARE, set the IP range for the current subnet, and click Scan or Load.
  • Use the miner manufacturer's IP Reporter tool.
  • Find the miner in the router's connected-device list.

If the IP cannot be found, check the Ethernet cable, switch, DHCP service, and miner indicator lights. Do not press Reset without confirming that existing settings can be cleared.

Sign In to the Miner Dashboard

Enter the miner IP in a browser and sign in with the dashboard username and password. If sign-in fails, verify the default credentials for the model or the password stored on site. Before resetting devices in bulk, confirm that production miners will not be affected.

Enter the Pool Settings

  1. Find the miner IP on the same LAN and open its dashboard in a browser.
  2. Open the pool configuration page.
  3. Enter a SHA256 endpoint under the primary pool.
  4. Enter the worker as sub-account.worker-name, for example mybtc.miner01.
  5. If the default password is 123, you can keep, change, or remove it.
  6. Use a different worker name for every miner so each device can be identified.
  7. Add alternate ports or endpoints under Pool 2 and Pool 3, then save and apply the settings.

Switch between the configuration examples for your network:

FieldPool addressWorkerPassword
Pool 1stratum+tcp://sha256.okminer-pool.com:2288mybtc.miner01123
Pool 2stratum+tcp://sha256.okminer-pool.com:333mybtc.miner01123
Pool 3stratum+ssl://ssha256.okminer-pool.com:2500mybtc.miner01123

Warning

Do not use your sign-in email, GID, wallet address, or App nickname as the sub-account. The sub-account in the worker must exactly match the BTC sub-account created in the App.

4. Check Operation

After saving, wait for the miner to submit valid shares, then check in this order:

  • The pool status in the miner dashboard shows connected or Alive.
  • The log continues to show accepted shares instead of repeated reconnections.
  • The miner appears in the miner list.
  • Real-time hashrate begins to appear.
  • Online status, rejection rate, and last share time are normal.
  • The miner dashboard shows the correct coin, endpoint, and sub-account.

Local and pool hashrate can differ over short periods. Let the miner stabilize and compare average hashrate over a longer period.

Immediately after connection, the dashboard status usually changes first. The pool miner list and real-time hashrate appear only after valid shares are received, and earnings require calculation and settlement. Do not repeatedly change settings simply because earnings are not visible immediately.

5. Configure Payouts

  1. Open and sign in to the OKMINER App, tap Pools in the bottom navigation → switch to BTC → find the sub-account → tap ⋮ to the right of the account → Payout Method. You can also go to Me → Payout Method, then select the BTC sub-account.
  2. Select a payout method:
    • OKMINER Wallet: Select No Payout Threshold, save, and complete the security verification. After payout, go to Me → Wallets → History → select BTC to verify the amount, status, and time. See Wallet Assets and Transaction History.
    • External BTC address: Select threshold-based payout, enter and verify the BTC receiving address, save, and complete the security verification. After payout, open View Details at the bottom of the sub-account's earnings card, select a date, and expand a Paid record to view payout time, receiving address, and on-chain transaction details.
  3. Reopen Payout Method and confirm the payout method and BTC address. Changes apply only to future earnings; settled or paid earnings are not redirected.

For change requirements and full steps, see Sub-account Mining. To check payout records and unpaid earnings, see Pool Earnings and Payouts.

Common Issues

  • Miner does not come online: Verify the endpoint, port, and sub-account.worker-name, then try an alternate port.
  • Connection fails: Run Pool Address Speed Test. If direct access is unavailable on the local network, use OKPROXY or the OKCARE encrypted proxy module.
  • High rejection rate: Check farm latency, packet loss, miner time, and firmware, and use a lower-latency endpoint.
  • Hashrate is present but there are no earnings: Confirm that shares are being submitted to the correct BTC sub-account and wait for the current settlement cycle.

If these steps do not resolve the issue, record the miner model, miner IP, sub-account, worker name, endpoint and port, start time of the issue, pool status in the miner dashboard, error logs, and screenshots of the miner status in the App, then contact us. Never provide a sign-in password, verification code, private key, or seed phrase.