BCH Mining Guide
BCH uses the SHA256 algorithm, like BTC, and can be mined with an ASIC miner that supports SHA256. Always use a BCH sub-account so that hashrate is credited to the correct coin.
Quick Reference
| Item | Current Details |
|---|---|
| Algorithm | SHA256 |
| Hardware | ASIC miners that support SHA256 |
| Payout scheme | FPPS |
| Standard payout threshold | 0.01 BCH |
| Pool fee | 2% |
1. Create a BCH Sub-account
- Open and sign in to the OKMINER App. Tap
Poolsin the bottom navigation bar, then tapAddin the upper-right corner. - Select
BCHand enter a sub-account name. - Configure the payout method and BCH payout address.
- Save and confirm that the BCH sub-account appears.
2. Select Pool Addresses
BTC and BCH share the same SHA256 endpoints; the sub-account determines the coin. To change coins, see Quickly Switch Between BTC and BCH.
stratum+tcp://sha256.okminer-pool.com:2288Alternate port: 333stratum+ssl://ssha256.okminer-pool.com:2500Alternate port: 334stratum+tcp://sha256-backup.okminer-pool.com:333Alternate port: 2323stratum+ssl://ss.love-bit.com:2000Alternate port: 330stratum+tcp://hk-sha256.okminer-pool.com:2288Alternate port: 333stratum+ssl://hk-ssha256.okminer-pool.com:2500Alternate port: 334stratum+tcp://af-sha256.okminer-pool.com:2288Alternate port: 333stratum+tcp://eu-sha256.okminer-pool.com:2288Alternate port: 333stratum+tcp://kz-sha256.okminer-pool.com:2288Alternate port: 333In the OKMINER App, open the BCH sub-account and tap Pool Address Speed Test. Select an endpoint that connects successfully and has low latency. TCP endpoints work with almost all miners and are recommended as the first choice; before using an SSL endpoint, confirm that the miner firmware supports SSL.
Tip
If users in Mainland China experience unstable connections with the endpoints above, we recommend using the OKPROXY encrypted proxy for a secure and stable connection.
3. Configure the Miner
Connect the computer and miner to the same LAN, find the miner IP, and sign in to the miner dashboard:
- Open the pool configuration page.
- Enter the primary endpoint in Pool 1 and alternate ports or backup endpoints in Pool 2 and Pool 3.
- Enter
BCH-sub-account.worker-nameas the worker, for examplemybch.miner01. - If the default password is
123, you may keep, change, or remove it. Then save and apply the configuration.
Switch between the examples below for your network environment:
| Field | Pool Address | Worker | Password |
|---|---|---|---|
| Pool 1 | stratum+tcp://sha256.okminer-pool.com:2288 | mybch.miner01 | 123 |
| Pool 2 | stratum+tcp://sha256.okminer-pool.com:333 | mybch.miner01 | 123 |
| Pool 3 | stratum+ssl://ssha256.okminer-pool.com:2500 | mybch.miner01 | 123 |
This example uses 192.168.152.128 as the OKPROXY server IP. Replace it with the IP of the computer or server that actually runs OKPROXY.
| Field | Pool Address | Worker | Password |
|---|---|---|---|
| Pool 1 | stratum+tcp://192.168.152.128:2233 | mybch.miner01 | 123 |
Warning
BTC and BCH share pool endpoints, but the sub-account determines the coin. The account in the worker name must match the BCH sub-account created in the App.
4. Check the Operating Status
After saving the configuration, wait for the miner to submit valid shares, then check in this order:
- Miner dashboard: The Pool status is connected or
Alive; the endpoint and BCH sub-account are correct; and accepted shares continue to appear in the log. - OKMINER App: Open the BCH sub-account and confirm that the miner appears and that its online status, real-time hashrate, rejection rate, and last share time are normal.
- Earnings records: Valid shares still require calculation and settlement. Do not repeatedly change the configuration simply because earnings are not yet visible.
The miner's local hashrate and pool hashrate may differ over short periods. Compare the longer-term average after the miner has run steadily.
5. Configure Payouts
- Open and sign in to the OKMINER App. Tap
Poolsin the bottom navigation bar, switch toBCH, find the target sub-account, tap⋮beside it, then tapPayout Method. You can also openMe>Payout Methodand select the BCH sub-account. - Select a payout destination:
- OKMINER Wallet: Select
OKMINER Wallet, save, and complete the security verification shown on the page. After a payout, openMe>Wallets>History, selectBCH, and verify the credited amount, status, and time. See Wallet Assets and Transaction History. - External BCH address: Enter and verify the BCH receiving address, save, and complete the security verification shown on the page. After a payout, tap
View Detailsat the bottom of theEarningscard for the BCH sub-account, select a date, and expand a record with thePaidstatus to view the payout time, payout address, and on-chain transaction information.
- OKMINER Wallet: Select
- Reopen
Payout Methodand confirm that the payout destination and BCH address are correct. Changes apply only to future earnings; earnings already settled or paid are not redirected to the new address.
For the requirements and full procedure for changing the payout method, see Sub-account Mining. To review payout records and unpaid earnings, see Pool Earnings and Payouts.
Common Issues
- Hashrate is credited to the wrong coin: Confirm that the worker name begins with the BCH sub-account.
- Miner will not come online: Check the endpoint, port, account format, and network, then try a backup endpoint.
- Pool hashrate is low: Compare average hashrate after the miner has run for a while, and check the rejection rate and hardware status.
- Payout not received: Check the payout address, payout threshold, and settlement status.
If the issue remains unresolved, record the miner model, miner IP, BCH sub-account, worker name, Pool configuration, time of the issue, error logs, and App status screenshots, then contact us. Do not provide your sign-in password, verification code, private key, or seed phrase.