Skip to content
Switch article
BTC Mining GuideLTC Mining GuideBCH Mining GuideETC Mining GuideRVN Mining GuideGPU OS User Guide

GPU OS User Guide

This guide explains how to use OKCARE to create an OKMINER GPU OS bootable USB drive, boot a GPU miner, and configure and manage mining in the OKMINER App. You do not need to enter pool settings locally on each miner.

Requirements

  • A GPU miner.
  • A USB drive with at least 8 GB of capacity. Creating the bootable drive erases all data on the USB drive, so back it up first.
  • A Windows computer that can connect to the same local network as the miner.
  • The OKMINER App installed and signed in.

Windows Requirements

  • Windows 10 version 1903 or later and Windows 11: These systems include .NET Framework 4.8 and support running OKCARE directly.
  • Windows 7 SP1, Windows 8/8.1, and Windows Server: Install .NET Framework 4.5.2 or later. Supported Windows Server versions include 2008 R2 SP1, 2012, 2012 R2, 2016, 2019, and 2022.
  • Windows ARM64: Runs through x64 emulation. Windows 11 ARM64 has been verified; compatibility with other ARM64 systems must be confirmed separately.

1. Install and Sign In to OKCARE

  1. Download OKCARE v5.0 on the Windows computer, complete the installation, and open OKCARE.
  2. When OKCARE displays a sign-in QR code, open and sign in to the OKMINER App.
  3. Tap Home in the bottom navigation → tap Scan in the upper-right corner → scan the QR code on the computer → tap Allow.
  4. Confirm that OKCARE displays the current account information.

For installation and QR-code sign-in instructions, see OKCARE User Guide.

2. Create a Bootable USB Drive

  1. Insert the USB drive into the Windows computer.
  2. In OKCARE, select GPU at the top, then click Create USB.
  3. Verify the target USB drive and its capacity to avoid selecting another disk.
  4. Select the OS build: choose the build on the right for RX470, RX480, RX570, RX580, RX590, 3060M, and 3070M; choose the build on the left for other GPU models.
  5. Verify that the GID shown on the page belongs to the OKMINER account that will manage the miner. If the GID is incorrect, the miner will not appear under the intended account.
  6. Start creating the drive. Do not remove the USB drive or close OKCARE before the process finishes.
  7. Safely eject the USB drive after completion.

Creation time depends on the network and USB-drive speed. If the progress bar remains unchanged for an extended period, see GPU Miner USB Creation Progress Is Stuck. To bind the miner to another account, load the miner in OKCARE's GPU module and use Switch GID. See GPU Module User Guide for other tools.

3. Set the Default Mining Template for the Default Farm Group

Before starting the miner, set a default mining template for the default farm group that the miner will join. When the miner comes online, it automatically inherits that group's default mining template; no manual binding is required.

  1. Open the OKMINER App and tap OS in the bottom navigation → select GPU and the default farm group → Templates → Mining Templates.
  2. Tap Add and enter a template name.
  3. Select the coin, algorithm, earnings account or wallet address, pool address, and mining software. Enter advanced parameters if required.
  4. Save the template and set it as the default mining template for the current default farm group.
  5. Return to the farm-group page and confirm that the correct default mining template is displayed.

When the miner comes online in that default farm group, it automatically inherits the default mining template. See Mining Templates for field descriptions, default-template settings, and manual application methods.

4. Optional: Create and Bind an Overclocking Template

  1. Tap OS in the bottom navigation → select GPU and the target farm → Templates → Overclocking Templates.
  2. Tap Add, select the exact GPU model, and begin with conservative frequency, voltage, power, and fan settings.
  3. Save the template, select the target miner or GPUs, and submit the binding.
  4. Monitor hashrate, temperature, power consumption, rejection rate, and logs. Reduce the settings or restore the previous configuration if abnormalities occur.

Do not apply settings for another GPU model if you are unfamiliar with the parameters. See Overclocking Templates.

5. Boot the Miner from the USB Drive

  1. Shut down the GPU miner, insert the prepared USB drive, and turn the miner on.
  2. Repeatedly press the motherboard's BIOS key during startup. Common keys include F2, Delete, F11, and F12.
  3. Open Boot in BIOS/UEFI. Some motherboards label this menu Startup, Boot Manager, or Boot Settings.
  4. Open Boot Option Priorities, Boot Priority, Boot Order, or Boot Sequence, and set Boot Option #1 to the USB drive. It may appear as UEFI USB DISK, USB Key, USB HDD, or the device brand.
  5. Open Save & Exit and select Save Changes and Exit; alternatively, press F10 to save and exit.
  6. Wait for the miner to restart into OKMINER GPU OS.

Menu labels vary by motherboard. Set only the USB drive as the first boot device; do not change unfamiliar BIOS settings.

6. Confirm the Miner Is Online and Mining

  1. Confirm that the miner display has entered OKMINER GPU OS, the Ethernet cable is connected, and the network is working.
  2. Open the OKMINER App and tap OS in the bottom navigation → select GPU and the target farm.
  3. Find the miner and confirm its GPU count, online status, and GID.
  4. Open Miner Details and confirm that the miner automatically inherited the default farm group's default mining template and that the active account, pool address, and mining software are correct. Bind an overclocking template only if needed.
  5. Wait for the mining software to start, then confirm that Miner Details shows hashrate, a pool connection, and share submissions. If the default mining template was not inherited, first confirm that the miner joined the correct default farm group and check that group's default mining-template setting.

If the miner does not appear or remains offline, see Miner Is Offline After Installing OKMINER OS.

7. Manage the Miner in the App

Tap OS in the bottom navigation → select GPU and the target farm to view miner counts, status, hashrate, and alerts. Open a miner to view its GPUs, pool, network, temperature, and logs.

Search or filter by miner name, IP address, GPU model, pool, or template. For an abnormal miner, check the logs and latest submission time before restarting the mining software or the miner.

8. Optional: Copy the System to a Drive

For long-term operation, you can copy OKMINER GPU OS from the USB drive to the miner's internal drive. This erases all data on the target drive; verify the drive and complete a backup first.

  1. Open OKCARE on the Windows computer and select the GPU module.
  2. Set the miner's IP range, click Load, and select the target miner.
  3. Click Format Disk, verify the target disk, and wait for completion.
  4. Click Copy System and wait for the copy to finish.
  5. Shut down the miner, remove the USB drive, restart it, and confirm that it boots into OKMINER GPU OS from the internal drive.

If an older OKMINER OS local menu provides an installation-to-drive option numbered 3, enter 3 and press Enter three times. If the menu differs, follow the options shown on the miner.

The USB drive must remain inserted while the system is booting and running from it. Remove it only after the system has been copied successfully and the miner can boot from the internal drive.