Mining Templates
Mining templates store the earnings account, pool addresses, mining software, and runtime parameters in one place. Saving a regular template does not modify miners automatically; set it as the default mining template for a farm group or bind it manually to target miners. A new miner that comes online in a farm group with a default mining template automatically inherits that template and does not require an additional binding action.
Open the OKMINER App and sign in. Tap OS in the bottom navigation bar, then open the template page that matches the miner type:
- GPU miners:
OS→GPU→ target farm →Templates→Mining Templates. - BTC, BCH, and similar miners:
OS→SHA256→ target farm →Templates→Mining Templates. - LTC and similar miners:
OS→Scrypt→ target farm →Templates→Mining Templates.
Set Up a Mining Template
GPU Template
- Go to
Mining Templates→Add, select a template icon, and enter a template name. - Under
Coin, select the target coin. The available pools, sub-accounts, and mining software update accordingly. - Under
Pools, select a recommended address for the coin. To use another address, see Pool Addresses or add a custom address underMy Added Pools. - Under
Sub-account, select where earnings belong. For OKMINER POOL, select the sub-account for the chosen coin; if none is available, create one by following Sub-account Mining. For an external pool, enter the mining account or wallet address required by that pool. - Under
Mining Software, select software that supports the coin and miner hardware, and review the developer fee shown on the page. The software developer charges this fee; it is not an OKMINER OS platform fee. - Use
Custom Mining Software Parametersonly for additional startup arguments supported by the selected software. Enter only parameters documented by the software developer and applicable to the current coin and hardware. Do not repeat the pool address, sub-account, or wallet address here. - Verify the template name, coin, pool, sub-account, and mining software → tap
Confirm→ complete the required security verification.
Leave Custom Mining Software Parameters empty when no special argument is needed. Incompatible arguments can prevent the software from starting or cause no hashrate, missing GPUs, or a higher rejection rate. After changing them, test the template on a small number of miners first.
SHA256 / Scrypt Template
- Go to
Mining Templates→Add, select a template icon, and enter a template name. - Under
Pool 1, select the primary pool. UnderMining Account 1, select an account that matches the pool and algorithm. - To configure a backup route, also complete
Pool 2andMining Account 2. Each numbered pool and account must be paired; do not change only one of them. - For OKMINER POOL, select the account for the algorithm under
My OKMINER POOL Mining Accounts. If a new account is needed, create it by following Sub-account Mining. For an external pool, selectOther Mining Accountand enter the account or wallet address required by that pool. - Select a recommended pool address or refer to Pool Addresses. If an account is marked
Merged Mining, confirm that it is the intended account for this configuration. - Verify the template name and both pool/account pairs → tap
Confirm→ complete the required security verification.
SHA256 and Scrypt use the same procedure, but each page displays only the pools and accounts available for that algorithm. If the required option is missing, return to the correct SHA256 or Scrypt entry instead of reusing a configuration from the other page.
To use a custom pool, go to Pools → My Added Pools → Add → enter the name, address, and port → add a backup address if needed → Save → return to the template and select the new pool. Obtain the address and port from the pool's official page, and verify the protocol, primary and backup addresses, and account format before saving.
Saving a template does not modify existing miners automatically. To let new miners inherit it when they come online, set it as the default mining template for the target farm group. To change existing miners immediately, bind the template manually.
Set the Default Mining Template
- Open
Templates→Mining Templatesfor the target farm group, then open the template to use. - Set the template as the default mining template for that farm group and confirm that the correct default template name is displayed.
- When a new miner comes online in that farm group, it automatically inherits the default mining template; no additional binding is required.
For miners that are already online and running, do not assume that the configuration has changed merely because the farm group displays a default template. Open miner details and verify the active configuration. If it has not changed, use the manual binding steps below.
Bind a Mining Template
- Select the entry for the required scope:
One miner: openMining Templatefrom miner details.
Multiple miners: press and hold a miner in the list, select the target devices, then openMining Template. You can also go toTemplates→Mining Templates→ open the target template →Bind, then select miners. - Verify the target farm, miner count, template name, and coin or algorithm → confirm the binding → complete the required security verification.
- Check the result in Task Center. If only some devices fail, retry only those devices. When the task finishes, open miner details and confirm that the active account, pool, mining software, hashrate, and share submission are normal.
Bind a new template to a small number of miners first. A reachable pool address does not by itself confirm normal share submission; verify both the task result and miner details.
Modify a Mining Template
- Open the existing template and check whether it is bound to miners and which devices the change will affect.
- Modify the account, pool, mining software, or advanced parameters, then save the template.
- Bind the updated template to the target miners again and check the result in Task Center.
- Return to miner details and confirm that the new configuration is active.
If a bound template produces no hashrate, verify that the coin or algorithm, sub-account or wallet address, pool address, mining software, and advanced parameters all match the device.
Unbind and Delete a Mining Template
To unbind a template, open its binding page, select the current template, and tap Unbind. Confirm the affected scope and submit the task, then check the task result and miner status.
To delete a template:
- Confirm that no miner still uses it; unbind it first if necessary.
- Tap delete in the template list, read the prompt, and complete the required security verification.
- Return to the list and confirm that the template has been removed.
Deleting a template does not cancel binding tasks that were already submitted. If miners still use the old configuration, first confirm in Task Center that the binding or unbinding task has finished, then check the current template in miner details.