Skip to content
Switch article
OKMINER OS User GuideFarm ManagementMiner Operations and SettingsGPUs and HashboardsMining TemplatesOverclocking TemplatesGPU OS Version, Driver, Disk, and VBIOS OperationsTask CenterFarm Permissions

Miner Operations and Settings

From the miner list, you can find devices, view operating data and logs, and perform configuration and maintenance operations on one or more miners.

Open the OKMINER App and sign in. Tap OS in the bottom navigation bar, then enter the target farm through the entry that matches the miner type:

  • GPU miners: OS → GPU.
  • BTC, BCH, and similar miners: OS → SHA256.
  • LTC and similar miners: OS → Scrypt.

The entry points differ, but finding miners, viewing details, and performing common operations work the same way. This guide identifies differences in filters, hardware fields, and buttons.

View Miners

Search for Miners and Filter by Status or Configuration

  1. Select the target farm from the appropriate entry and open Miners.
  2. Search by miner ID, name, IP address, or MAC address.
  3. Filter by Normal, Abnormal, or Offline/No Hashrate status.
  4. Open the filter panel and select the applicable conditions:
    GPU: coin, region, type, mining software, GPU model, CPU model, active pool, active account, IP assignment method, IP range, OS version, boot drive, mining template, and overclocking template.
    SHA256 and Scrypt: region, ASIC model, active pool, active account, IP assignment method, IP range, firmware version, OKBOOST, identification-light status, mining template, overclocking template, hashrate, frequency, and temperature range.
  5. Use the sort button to change the display order. Sorting does not modify miner configuration.

View Operating Details and Troubleshoot Abnormalities

Open a miner to view online status, local and pool hashrate, rejection rate, latency, temperature, power consumption, and uptime. For a GPU miner, continue to GPU details; for a SHA256 or Scrypt miner, continue to hashboard details.

GPU miners can be filtered by Offline/No Hashrate, High Rejection Rate, Missing GPU, Disabled GPU, and Motherboard Abnormality. Open the relevant category to identify the miner, then use miner details, GPU status, and logs to troubleshoot it.

  • Offline: Check the miner's network, on-site power, and recent tasks.
  • Local hashrate but no pool data: Verify the pool address, account, latency, and share-submission records.
  • No local or pool hashrate: Check the mining software, template, GPUs or hashboards, and mining log.
  • High rejection rate: Check the network, pool node, temperature, and overclocking parameters.
  • Temperature or fan abnormality: Check fans, wiring, dust, cooling conditions, and power consumption.
  • Missing GPU or chip: Confirm the hardware status under GPUs and Hashboards before removing anything.

View Charts and Logs

Use the following information together to diagnose hashrate, temperature, or operating abnormalities:

  • Hashrate chart: View hashrate and temperature changes by day, week, or month to identify when the abnormality began.
  • Operation log: Review the action type, operator, and time to determine whether a restart, overclocking change, miner rename, or template change coincided with the abnormality.
  • Mining log: Review pool connection, account, mining-software, and driver records, and confirm that accepted shares are being reported normally.

Operate Miners

Identify an ASIC Miner with the Light

In the SHA256 or Scrypt miner list, select Turn On Light, locate the physical device by its light, then select Turn Off Light to end identification.

Remote Access: Remote View and SSH

Open the OKMINER App and sign in, then go to OS → SHA256 or Scrypt → target farm → Miners → target miner. Two remote-access methods are available:

  • Remote View: Opens the miner's local page so you can view its actual parameters. It works only for an online miner, and the phone must be able to reach the miner's network. If the page does not open, check the miner's online status, IP address, and network connectivity.
  • SSH: Signs in to the miner's system backend. An incorrect command can disrupt mining. Do not use SSH if you are unfamiliar with Linux commands and permissions, and never share the sign-in credentials.

Remote View works only for online miners. Availability of Remote View and SSH also depends on the farm permissions of the current account.

Rename a Miner

For a large number of miners, use names based on rack, area, IP suffix, or maintenance ID. In the miner list, press and hold the miner → select Rename Miner → enter the new name → confirm. Renaming restarts the miner. The name cannot contain Chinese characters or special characters. After completion, search for the new name to confirm the change.

Use DHCP or Set a Static IP

Open Miner Settings → Change Network Configuration for the target miner, then select automatic IP assignment or a static IP.

  1. Automatic IP assignment: Select DHCP.
  2. Static IP: Select Static IP, then enter the IP address, subnet mask, gateway, primary DNS, and secondary DNS.
  3. Before saving, record the original IP address, gateway, DNS addresses, and MAC address.
  4. After submission, check the result in Task Center and confirm that the miner remains online.

An incorrect IP address, subnet mask, gateway, or DNS address can make the miner unreachable. Before changing multiple miners, verify the parameters and network connectivity on one miner.

Restart, Shut Down, Pause Mining, or Move Miners

Open the OKMINER App and sign in, then go to OS → GPU, SHA256, or Scrypt → target farm → Miners. Select an entry based on the operation scope:

  • One miner: Open the target miner and select the operation from miner details.
  • Multiple miners: Press and hold a miner in the list to enter selection mode → select the other target miners → open the action menu → select the operation.

Available remote operations include:

  • Restart: Restart Miner restarts the entire device; Restart Software restarts only the mining software.
  • Pause or resume mining: Select Pause Mining or Start Mining to stop or resume the current mining task. Confirm the hashrate after resuming.
  • Shut down: Select Shut Down Miner to shut down the miner system. Whether chassis fans and the power supply also stop is controlled by the motherboard hardware.
  • Move to another farm: Move selected miners between farms under the same account without transferring farm ownership. If the page asks whether to bind the destination farm's default mining template, select the option that matches your needs.

Before submitting, verify the target miners and selected count. For a batch restart, shutdown, or farm move, test with a small number of miners first. After submission, check each miner's execution status in Task Center.