Skip to content
Switch article
OKMINER OS User GuideFarm ManagementMiner Operations and SettingsGPUs and HashboardsMining TemplatesOverclocking TemplatesGPU OS Version, Driver, Disk, and VBIOS OperationsTask CenterFarm Permissions

GPU OS Version, Driver, Disk, and VBIOS Operations

This guide covers OS, driver, disk, and VBIOS operations for GPU miners. Open the OKMINER App and sign in, then go to OS → GPU → target farm → target miner.

Driver upgrades, disk formatting, system copying, and VBIOS flashing can change the miner's system, boot configuration, or local data. Confirm the target device and version before proceeding, and test on one miner before a batch operation.

Upgrade the OKMINER OS Version

  1. Open miner settings and check the current OS version. For a batch upgrade, press and hold a miner in the list, select miners of the same type, then select OS Upgrade.
  2. Confirm that the target version supports the miner, GPUs, and boot drive, then test it on one miner.
  3. After submission, check the result in Task Center. Do not power off or force-restart the miner during the upgrade.
  4. When it finishes, confirm the OS version, GPU detection, mining software, templates, and hashrate.

Upgrade or Downgrade the GPU Driver

  1. Open Driver Version in miner settings and review the current and target versions.
  2. Confirm that the miner is online and that the target version supports the GPUs and mining software.
  3. Submit an upgrade or a downgrade offered by the page, then check the result in Task Center.
  4. After success, confirm the driver version, GPU detection, hashrate, temperature, and logs.

For a batch operation, press and hold a miner in the list, select miners of the same type, then select Driver Upgrade.

Format a Specific Disk

  1. Select the exact disk in miner settings.
  2. Read the prompt and confirm which data will be erased and whether system startup will be affected.
  3. Submit only when formatting is required.
  4. After the task finishes, check disk capacity, mount status, and miner online status.

If you cannot identify the disk or the data that will be erased, cancel the operation. If the task fails, review the failure reason instead of submitting it repeatedly.

Copy the System Between a USB Drive and a Hard Drive

Copy System copies the OS between a USB drive and a hard drive on a GPU miner.

  1. Open miner settings and verify the source and destination disks.
  2. If the destination must be formatted, confirm that its data is no longer needed.
  3. Select the correct copy direction. Do not power off the miner or remove either drive before the task finishes.
  4. After copying from a USB drive to a hard drive, follow the page instructions to shut down the miner, remove the USB drive, boot from the hard drive, and confirm that the miner comes online.

Back Up or Flash VBIOS

  1. Open GPU details and verify the model, manufacturer, memory, and current VBIOS.
  2. On a normal GPU, select VBIOS → Back Up VBIOS.
  3. On a GPU with the same model and memory configuration, select Flash VBIOS and choose the matching backup.
  4. After submission, check the task result, then confirm hardware detection, hashrate, temperature, and logs.

Do not assume that a VBIOS is compatible based only on the GPU name. A VBIOS that does not match the GPU model or memory can make the GPU abnormal or unusable. If a task fails, stop the batch operation and process only the failed devices.