ETC Mining Guide
ETC uses the ETCHash algorithm and can be mined with supported ETC ASIC or GPU miners. This guide covers both sub-account mining and anonymous mining.
Quick Reference
| Item | Current Details |
|---|---|
| Algorithm | ETCHash |
| Hardware | GPU or ASIC miners that support ETCHash |
| Mining method | Sub-account or anonymous mining |
| Payout scheme | FPPS |
| Standard payout threshold | 0.1 ETC |
| Pool fee | 2% |
1. Select a Mining Method
Sub-account Mining
Open and sign in to the OKMINER App. Tap Pools in the bottom navigation bar, tap Add in the upper-right corner, select ETC, and create a sub-account. Use sub-account.worker-name as the worker so that miners, hashrate, and earnings can be managed together in the App.
Anonymous Mining
Anonymous mining uses an ETC wallet address as the account and does not require a sub-account. The address must be able to receive ETC; do not enter an address for another coin. See Anonymous Mining for complete instructions.
2. Select a Pool Address
stratum+tcp://etc.okminer-pool.com:1777Alternate port: 86stratum+ssl://setc.okminer-pool.com:3555Alternate port: 404stratum+tcp://asia.etc.okminer-pool.com:1777Alternate port: 86stratum+ssl://sc.love-bit.com:3000Alternate port: 400stratum+tcp://etc-e9.love-bit.com:410In the OKMINER App, open the ETC sub-account and select Pool Address Speed Test. Choose an endpoint that connects with low latency. TCP endpoints work with almost all miners and mining software and are recommended as the first choice; Before using an SSL endpoint, confirm that the miner firmware or mining software supports SSL. Antminer E9 Pro uses its dedicated TCP endpoint.
Tip
If direct pool connections are unstable in mainland China, we recommend using the OKPROXY encrypted proxy for a secure and stable connection.
3. Configure the Miner or Software
ASIC Miner
Find the miner IP with OKCARE, IP Reporter, or the router's device list. Open the miner dashboard in a browser and configure primary and alternate pools.
Switch between the following ASIC configuration examples for your network environment:
| Field | Pool Address | Worker | Password |
|---|---|---|---|
| Pool 1 | stratum+tcp://etc.okminer-pool.com:1777 | myetc.miner01 | 123 |
| Pool 2 | stratum+tcp://etc.okminer-pool.com:86 | myetc.miner01 | 123 |
| Pool 3 | stratum+ssl://setc.okminer-pool.com:3555 | myetc.miner01 | 123 |
This example uses OKPROXY server IP 192.168.152.128. Replace it with the IP of the computer or server actually running OKPROXY.
| Supported Device | Pool Address | Worker | Password |
|---|---|---|---|
| Standard ETC miner | stratum+tcp://192.168.152.128:4444 | myetc.miner01 | 123 |
| Antminer E9 | stratum+tcp://192.168.152.128:7777 | myetc.miner01 | 123 |
GPU Miner
Select mining software that supports ETCHash. Enter the pool address, sub-account, and worker name in its configuration file or startup arguments. Start with the default settings, then adjust overclocking only after valid shares and temperatures are stable.
- Open the miner dashboard or mining software configuration.
- Enter an ETC pool address.
- For sub-account mining, enter
ETC-sub-account.worker-name. For anonymous mining, enter the ETC wallet address and worker name in the format shown on the page. - If the default password is
123, you may keep, change, or remove it. - Add an alternate endpoint, save, and start mining.
4. Check the Operating Status
After saving, wait for the device to submit valid shares, then confirm the following in order:
- Miner dashboard or mining software: It is connected; the address and account are correct; and accepted shares continue to appear in the log.
- OKMINER App: For sub-account mining, open the ETC sub-account and check the miner, hashrate, rejection rate, and last share time. Anonymous mining queries require no sign-in: search the wallet address used by the miner on the official ETC anonymous mining page, or use the same address in the App.
- GPU status: Check temperature, power consumption, memory errors, and driver status to confirm stable operation.
- Earnings records: Earnings still require calculation and settlement after valid shares are submitted. Do not repeatedly change the configuration because earnings are temporarily absent.
5. Configure Payouts
Sub-account Mining
- Open and sign in to the OKMINER App. Tap
Poolsin the bottom navigation bar, switch toETC, find the target sub-account, tap⋮, and selectPayout Method. You can also openMe>Payout Method, then select the ETC sub-account. - Select a payout destination:
- OKMINER Wallet: Select
OKMINER Wallet, save, and complete the security verification. After a payout, go toMe>Wallets>History, selectETC, and check the credited amount, status, and time. See Wallet Assets and Transaction History. - External ETC address: Enter and verify the ETC payout address, save, and complete the security verification. After a payout, tap
View Detailsat the bottom of theEarningscard in the ETC sub-account, select a date, and expand aPaidrecord to view the payout time, payout address, and on-chain transaction information.
- OKMINER Wallet: Select
- Reopen
Payout Methodand confirm the payout destination and ETC address. Changes apply only to subsequent earnings; earnings already settled or paid are not redirected to the new address.
For complete payout-method instructions, see Sub-account Mining. For payout records and unpaid earnings, see Pool Earnings and Payouts.
Anonymous Mining
Anonymous mining has no separate Payout Method setting. Earnings are sent to the ETC wallet address entered as the mining account.
Neither the official website nor the OKMINER App requires sign-in to query anonymous mining. On the official ETC anonymous mining page, enter the wallet address used by the miner and search. Alternatively, open the OKMINER App. Tap Pools in the bottom navigation bar > the upper-right menu > Anonymous Mining > ETC, then enter the wallet address used by the miner to view earnings, settlement status, and payment records. If the wallet address is incorrect, earnings will be sent to the wrong address and cannot be recovered. See Anonymous Mining for complete configuration and query instructions.
Common Issues
- E9 Pro cannot connect: Confirm that you are using the E9 Pro-specific TCP endpoint, then verify the endpoint, port, and network connection.
- Local GPU hashrate is present but the pool shows no data: Check the algorithm, endpoint, worker format, and share-submission log.
- High rejection rate: Check network latency, overclocking stability, miner time, and software version.
- Anonymous earnings cannot be found: Confirm that the wallet address used for the query exactly matches the miner configuration.
If the issue remains unresolved, record the device model, GPU and driver details, mining software version, endpoint and port, account or wallet address, time of the issue, error logs, and status screenshots, then contact us. Never provide passwords, verification codes, private keys, or recovery phrases.