GPU Module Tutorial
The OKCARE GPU module manages AMD and NVIDIA GPU miners running OKMINER OS. After loading miners, you can filter or sort the list by IP address, model, or status. Available features depend on the OKMINER OS version, driver, GPU model, and current OKCARE version. Test changes on one miner before batch upgrades, formatting, or driver updates.
Create a Bootable USB Drive
Creation Erases Data
Creating a bootable USB drive erases all data on the selected drive. Before you begin, back up any data you need to keep and confirm that you have selected the intended USB drive to avoid erasing another storage device.
- Insert an 8 GB or larger USB drive into the computer.
- Open OKCARE and select the
GPUmodule. - Click
Create USB. - After OKCARE downloads the writing tool, select the USB drive.
- Select the system version for the GPU model: choose the version on the right for
RX470,RX480,RX570,RX580,RX590,3060M, and3070M; choose the version on the left for all other GPU models. - Wait for writing to finish.
Insert the USB drive into the GPU miner, open the motherboard BIOS, set USB as the boot device under Boot, then select Save Changes and Exit to save the settings and restart.
The BIOS key varies by motherboard and is commonly F2 or Delete. Change only the boot order, then save and confirm that OKMINER OS starts normally. If you do not understand another BIOS option, do not change it.
If a progress bar remains stuck:
- First progress bar: Check the computer's network and confirm that the drive containing OKCARE has enough free space.
- Second progress bar: Format and write the USB drive again, or use another USB drive.
- Third progress bar reports that binding the User ID failed: Finish creating the drive, then use
Switch GIDin OKCARE.
Set an IP Range and Load Miners
- Open the
GPUmodule and click+next toIP Range. - Enter the IP range containing the GPU miners.
- Click
Loadand view the discovered miners in the list. - Select miners, then click
Scanto refresh their status orRestartto restart them.
If no miners appear, confirm that the computer and miners are on the same LAN, the miners have started normally, and their Ethernet cables are connected. If they still do not load, check the GPU miner's network, IP address, and OKMINER OS status.
Find and Set a Miner IP
If the miner IP address is unknown:
- Click
IP Reporterin OKCARE. - Connect a mouse to the GPU miner and click the middle button. Alternatively, double-click the left button and then click the right button.
- Record the address shown by OKCARE.
To change the miner IP address, click IP Settings, enter the IP address, subnet mask, gateway, and DNS, and submit. Select DHCP to obtain an address automatically or Static to set a fixed address.
Switch GID
If USB creation reports a User ID binding failure, the miner screen shows User ID: 99999, the miner is bound to another account's GID, or the account must be rebound after a system upgrade, use Switch GID to rebind the miner to a specified OKMINER account. Enter the GID of the account that should manage the miner.
- Load and select the miner in the
GPUmodule. - Click
Switch GID. - After binding succeeds, confirm in the OKMINER App that the miner appears under the current account.
You can also connect a keyboard to the GPU miner and enter changeGid your-GID. The command is case-sensitive, with one space between changeGid and the numeric GID.
OKMINER Upgrade and Overclocking
To upgrade OKMINER on a GPU miner, load and select it in the GPU module, click OKMINER Upgrade, and follow the page instructions to install the latest version currently available.
To adjust overclocking parameters, click Overclocking in OKCARE, then complete the settings in Miner Management in the OKMINER App. This button does not directly change overclocking parameters within OKCARE. Overclocking affects stability and power use; do not apply unverified settings.
Format a Drive and Copy the System
To copy OKMINER OS from a USB drive to a disk:
Formatting erases data
Formatting erases all data on the target disk. Before you begin, confirm the target disk and back up any data you need to keep. From the start of formatting until the system copy finishes, do not remove the USB drive or target disk, close OKCARE, or cut power to the miner. If the task fails, check the failure reason first; do not submit it repeatedly.
- Select the miner and click
Format Disk. - After formatting, click
Copy System. - Wait for copying to finish.
- Remove the USB drive, restart the miner, and confirm that it boots from the disk.
In the local menu of an older OS version, enter 3 to start the installation-to-disk process. Follow the on-screen prompts to confirm the target disk step by step and complete the installation. Do not press Enter repeatedly to skip confirmations. After installation is complete, remove the USB drive, restart the miner, and confirm that the system boots from the disk.
Update a Driver
- Select the miner.
- Click
Driver Update. - Select the required driver file and follow the page instructions to download it.
- Click Next after the download finishes.
- Select the downloaded driver and submit the update.