Skip to content
Switch article
Using OKCAREASIC Module TutorialGPU Module TutorialEncrypted Proxy Module Tutorial

Encrypted Proxy Module Tutorial

The encrypted proxy module in OKCARE provides a local proxy address for miners on the LAN and supports only 64-bit Windows 10/11. See Using OKCARE for OKCARE installation and sign-in instructions.

The proxy computer must remain online. If it shuts down, sleeps, or changes IP address, miners may lose their proxy connection.

Run the Proxy

  1. Select the Encrypted Proxy module in OKCARE.
  2. Click Run Proxy.
  3. If prompted to assign a static IP, click Yes.
  4. Disable Windows Defender Firewall: turn off the firewall for both private and public network settings. See the OKPROXY for Windows guide for the complete steps.
  5. After the proxy starts, record the proxy server IP.

When the proxy is not running, the Stop Proxy button is unavailable. If the proxy cannot connect, first confirm that the OKCARE encrypted proxy is running and that Windows Defender Firewall is disabled for both private and public networks. If the problem remains, check whether other security software is blocking OKCARE/okproxy.

Configure the Pool Address

In the miner's pool settings, use this format:

stratum+tcp://proxy-server-IP:port

For example, if the proxy server IP is 192.168.2.195 and BTC uses port 2222, enter:

stratum+tcp://192.168.2.195:2222

Common ports for the OKCARE encrypted proxy module:

  • BTC: 2222
  • LTC: 1111
  • ETC: 4444

If a miner cannot connect:

  1. Confirm that the miner and proxy computer are on the same LAN.
  2. Confirm that the miner uses the proxy computer's LAN IP.
  3. Confirm that the port matches the coin.
  4. If the proxy computer IP changed after a restart or reconnection, update the pool address on the miner. Assigning a static IP to the proxy computer is recommended.

Start at Boot

  1. Right-click OKCARE and select Open file location from the Windows menu.
  2. Open tools/okproxy.
  3. Right-click okproxy and select Create shortcut.
  4. Open the Windows Startup folder.
  5. Move the shortcut into that folder.

Common Windows 10/11 Startup folder:

C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp

Stop the Proxy

To stop the encrypted proxy, click Stop Proxy in OKCARE.