Skip to content
Switch article
Miner Is Offline After Installing OKMINER FirmwareCannot Open the Miner DashboardMiner Has No HashrateHigh Miner TemperatureMissing HashboardMissing ChipsFan ErrorHigh Rejection Rate

Missing Hashboard

Missing Hashboard means the miner did not detect an expected hashboard. Open and sign in to the OKMINER App, then tap OS in the bottom navigation > SHA256 or Scrypt > target farm > miner > Operating Status and check the hashboard count and status.

After confirming that a hashboard is missing, follow these steps in order:

  1. If the miner is using overclocking settings, restore the factory frequency first. If the issue persists, reduce the frequency as appropriate and try again.
  2. Restart the miner and check whether the hashboard returns.
  3. Check the data cable between the hashboard and control board.
  4. Check the hashboard power cable.
  5. Test another power supply.
  6. If it is still not detected, the hashboard may be faulty.

Safety

Shut down normally and disconnect power before inspecting or reconnecting cables.