Skip to content
Switch article
Miner Is Offline After Installing OKMINER FirmwareCannot Open the Miner DashboardMiner Has No HashrateHigh Miner TemperatureMissing HashboardMissing ChipsFan ErrorHigh Rejection Rate

Cannot Open the Miner Dashboard

Open OKCARE, go to ASIC > Load or Scan, and find the miner IP. Enter that IP in a browser on a computer on the same LAN.

If the page does not open:

  1. Network reachability: The computer and miner must be on the same LAN and subnet.
  2. Miner startup: About 30 seconds after power-on, the network-port lights generally turn off and then come back on.
  3. Physical connection: Confirm that the cable is secure and port lights are on. Try another cable or switch port if needed.