Skip to content
Switch article
Miner Is Offline After Installing OKMINER FirmwareCannot Open the Miner DashboardMiner Has No HashrateHigh Miner TemperatureMissing HashboardMissing ChipsFan ErrorHigh Rejection Rate

Miner Has No Hashrate

Path: Open and sign in to the OKMINER App, then tap OS in the bottom navigation > SHA256 or Scrypt > target farm > miner > Operating Status. After confirming that the miner has no hashrate, troubleshoot in this order:

  1. Verify the pool address and sub-account.
  2. Check whether anonymous mining is being used. On the OKMINER pool, only ETC supports anonymous mining; other coins require a sub-account.
  3. Check the miner log for a pool connection. If disconnected, use another address for the same coin or OKMINER encrypted proxy.
  4. Confirm that the protocol is supported by the firmware. If stratum+ssl cannot connect, use a stratum+tcp endpoint for the same coin or connect through OKPROXY.