Skip to content
Switch article
Miner Is Offline After Installing OKMINER FirmwareCannot Open the Miner DashboardMiner Has No HashrateHigh Miner TemperatureMissing HashboardMissing ChipsFan ErrorHigh Rejection Rate

Fan Error

Path: Open and sign in to the OKMINER App, then tap OS in the bottom navigation > SHA256 or Scrypt > target farm > miner > Operating Status. Check fan speed and errors.

After confirming the fan error, follow these steps in order:

  1. Connect the affected fan to another fan header on the control board, power the miner on again, and test it.
  2. If the error clears, the original header may be faulty. If it continues, replace the fan.

Safety

Shut down normally and disconnect power before reconnecting or replacing a fan.