Skip to content
Switch article
Miner Is Offline After Installing OKMINER FirmwareCannot Open the Miner DashboardMiner Has No HashrateHigh Miner TemperatureMissing HashboardMissing ChipsFan ErrorHigh Rejection Rate

High Rejection Rate

Path: Open and sign in to the OKMINER App, then tap OS in the bottom navigation > SHA256 or Scrypt > target farm > miner > Operating Status and check the rejection rate.

After confirming that the rejection rate is high, follow these steps in order:

  1. If the miner is using overclocking settings, restore the factory frequency first. If the issue persists, reduce the frequency as appropriate and check whether the rejection rate returns to normal.
  2. Check miner logs for chip errors. Repeated errors may indicate a chip fault.
  3. Check network latency and stability, and try another Ethernet cable, switch port, or pool address.