Skip to content
Switch article
Cannot Find a Sub-accountHow Are Hashrate Units Converted?Why Is Pool Hashrate Lower Than Local Hashrate?Why Are My Workers and Earnings Not Showing?Pool Shows Paid but Funds Were Not ReceivedWhy Was Payment Not Sent After Reaching the Threshold?Why Do Actual Earnings Differ from Estimated Earnings?Why Have My Mining Earnings Decreased?Does OKMINER Charge a Pool Payout Fee?What If an Exchange Changes My Deposit Address?High Pool Rejection RateHow Can I Receive Earnings Below the Payout Threshold?View Unpaid Earnings

High Pool Rejection Rate

View path: Open and sign in to the OKMINER App, tap Pools in the bottom navigation, select the coin and sub-account you want to check, then view each worker's rejection rate in the worker list.

After confirming that the rejection rate is high, troubleshoot in this order:

  1. Check whether the miner is overclocked or its operating frequency is set too high. Reduce the frequency or restore the default settings, then observe the rejection rate again.
  2. Check network latency and stability. Try replacing the network cable, changing the switch port, or using another pool address.
  3. Check whether there is an IP address conflict on the local network.

After making changes, let the miner run for a period of time before comparing rejection rates. Do not judge from instantaneous data alone.