Skip to content
Switch article
High Rejection RateMissing GPUHigh GPU TemperatureMiner Has No HashrateMiner Is Offline After Installing OKMINER OSMotherboard Alert

Missing GPU

Path: Open and sign in to the OKMINER App, then tap OS in the bottom navigation > GPU > target farm > miner > Operating Status. Check the online GPU count and missing-GPU information.

If Operating Status shows a missing GPU, first understand how missing-GPU records are generated, then use the steps below to determine whether it is an old record or an actual detection problem.

A missing-GPU record compares GPUs detected during the current boot with historical records; it is not necessarily the number of physically missing GPUs. Reseating a GPU or moving a riser or PCIe slot can change enumeration. An unmatched old record may be marked missing while the currently detected GPU creates a new record. Therefore, even if only one GPU is physically missing, the page may show multiple obsolete missing-GPU records.

Insufficient power, loose risers or data cables, poor PCIe contact, unstable overclocking, driver initialization failure, or GPU failure can also temporarily prevent the GPU from being detected during the current boot.

  1. Compare the online GPU count with the installed count. If they match, all GPUs are currently detected and historical missing records can be removed.
  2. If fewer GPUs are online, record the missing GPU number, restart the miner, restore default overclocking, and check again.
  3. If it remains missing, shut down normally and disconnect power. Check its power cable, riser, data cable, and slot.
  4. Swap cables or slots and restart. If the fault follows a cable or slot, investigate that connection. If the same GPU always fails, inspect the GPU itself.

Never touch or remove hardware while power is connected.